DS13 JANUS chassis InPC

DS13120 JANUS Bi-format 19" 1U Height
Only 270mm (10,5 Inches) Deep!

19" 1U height
Only 270mm deep (twice as little as a regular chassis)
Two-way mounting cover with possibility to have the rack brackets either on the front or back chassis sides with CD, I/O and power supply connectors facing either front or back (no need to remove the unit for CD change and routine cable maintenance)
Two units fit back-to-back in the same 1U bay in standard 700mm deep rack with safe airflow spaces and good cooling
Wide cutout on a back side for rear I/O connectors. This cutout is covered by special low profile shield/plate. 9 types of plates with 9 shapes for the EPIA, EPIA-M, EPIA-PD, EPIA SP Mini-ITX and most popular micro-ATX motherboards are avalable (optional).
1 HDD bay when micro-ATX motherboard used or 2 HDD bay when Mini-ITX motherboard used
1 FDD bay with FDD cutout (at the front only, can be blanked out)
1 Slim CDD bay with FDD cutout (at the front and at the back, can be blanked out)
1 PCI expansion slot (PCI riser optional)
3x40mm cooling fans are located at CPU area (build in PSU)
120W @ 0..+45^o°C, (110/220VAC) Power Supply with:
+12V 4,5A
+5V 14A
+3,3V 7,5A
-12V 0,2A
+5Vsb 1,5A
Dimensions:
483(W)x270(D)x43(H)mm
1mm thick steel housing material
  Net/GW:  steel 4/4,5(kg)
RAL7032 (light grey) or RAL9005 (black) painted
Package:
   500(W)x330(D)x85(H)mm
  Options:
1U PCI riser (1R)

Janus, the ambivalent Indo-European deity with two faces, one on each side..

Ultra compact solution for systems based on Mini-ITX or Micro-ATX form-factor board with P4 CPU and CD. Bi-format capability and two-faced design with good CPU cooling effectively doubling capacity, connection options and allow to migrate from Micro-ATX to Mini-ITX and back over life time of system, Thanks to compact design chassis can be used in non-deep racks or in add-on mini-cabinets within limited spaces (bandwidth monitor, firewall, router, small server).

PCI riser 1R

Detailed information on shields

shields.pdf 54 481 bytes

The same chassis and variety planes. Select Your variant.

	Ordering interlogic part numbers:
	DS13120-E5 DS13 chassis with "E5" plate DS13120-E9 DS13 chassis with "E9" plate DS13120-PD DS13 chassis with "PD" plate DS13120-SP DS13 chassis with "SP" plate DS13120-AS DS13 chassis with "AS" plate DS13120-GB DS13 chassis with "GB" plate DS13120-WD DS13 chassis with "WD" plate DS13120-VS DS13 chassis with "VS" plate

DS13 mini-ITX, 2xHDD, FDD&HDD versions, gif 600x827x8 15 712 bytes

DS13 mini-ITX, HDD&slimCDD&slimFDD, HDD&slimCDD versions, gif 600x827x8 16 483 bytes

DS13 mATX, 2,5"HDD&slimCDD, HDD versions, gif 600x827x8 16 358 bytes

DS13 mATX, FDD, HDD&slim CDD versions, gif 600x827x8 16 675 bytes


	Motherboard EPIA-PD	Motherboard EPIA-800

	Contact us for best price and other configurations

e-mail:inpc@inpc.kiev.ua

Home Products Support About us

07.07.2005 ->