|
|
|
DS15050
JANUS 19"
1U Height
Only
200mm (7,9 Inches) Deep!
|
19" 1U height
Only 200mm deep
(more then twice as little as a regular chassis)
Two-way mounting cover with possibility to have the rack brackets either
on the front or back chassis sides with I/O and power supply connectors
facing either front or back (no need to remove the unit for routine cable
maintenance)
Two units fit
back-to-back in the same 1U bay in standard 600mm deep rack with safe airflow
spaces and good cooling
Wide cutout
on a back side for rear I/O connectors. This cutout is covered by special
low profile shield/plate. 4 types of plates with 4 shapes for the EPIA,
EPIA-M, EPIA-PD, EPIA-SP motherboards are avalable (optional).
1 HDD &
1 FDD bays
FDD cutouts
(at the front and the back) can be blanked out and a second hard drive can
be mounted instead FDD
1 PCI expansion
slot (PCI riser optional)
2x40mm cooling
fans
High efficiency
50W @ 0..+45o°C, Full range (90..265VAC) or +24VDC Fanless
Power Supply with:
+12V 0..2A
+5V 0..6A
+3,3V 0..3A
-12V 0..0,1A
+5Vsb 0..2A
Dimensions:
483(W)x200(D)x43(H)mm
1mm thick steel
housing material
Net/GW: steel
2,4/2,8(kg)
RAL7032 (light
grey) or RAL9005 (black) painted
Package:
500(W)x290(D)x85(H)mm
Options:
EPIA rear shield/plate
"E5"
EPIA M rear shield/plate
"E9"
EPIA PD rear shield/plate"PD"
EPIA SP rear shield/plate"SP"
1U PCI riser (1R)
FanMagic - internal
airflow temperature monitoring and WatchDog timer by remote access to fan
controller with TCP/IP over SLIP (RS-232 TTL level). Controller provides
fans revolution monitoring & fault-tolerant long-life performance fans
control |
|