| Form Factor
|
| 2U chassis supports for standard ATX (305x244mm) and MicroATX (244x244mm) motherboard
|
| Dimensions(mm)
|
| Height: 88mm |
|
| Width: 483mm |
|
| Depth: 545mm |
|
| Net weight: 11kg |
Expansion slots
|
- 2x Full-height PCI expansion slot (horizontal)
- 5x Low Profile PCI expansion slot (vertical)
|
| Drive Bays
|
- 4x 5.25" bay to install 4x CDD, 4x HDD mobile rack, backplane etc.
- 1x FDD bay with smile cutouts on front panel
|
| Front Panel
|
| TeleServ® - front panel controller - includes a watchdog to supervise
the computer and has 4 buttons and 16x2 LCD to allow for a dialog with the user. You can set IP address, netmask, gateway address, shutdown
the computer, readout statistics, basically anything you want because most of the logic is implemented with a perl script and it can be
changed easily. The panel is connected to your computer via RS232 serial line.
|
|
LEDs:
- Power
- Hard drive activity
- Alarm
|
 |
|
|
|
| System Cooling
|
- 4x 80x80x25 2800RPM fans, 3.72m3 total controlled by TeleServ®. The use of controller increases
reliability of hardware work due to total monitoring of
cooling system and signalling in case of failure. The use
of controller combined with the system of redundant
cooling allows to create fault-tolerant system with
long-life performance.
- 1x 80x80 PSU fan
|
| Operating Environment (System)
|
| Operating Temperature Range: +5~50º
|
| Power Supply
|
| PSU |
360W |
420W |
460W |
| Input Voltage |
220VAC |
220VAC |
220VAC |
| +3.3V |
28A |
30A |
30A |
| 25A |
35A |
40A |
30A |
| +5V standby |
2A |
2A |
2A |
| -5V |
0.3A |
0.3A |
- |
+12V1
+12V2 |
17A
- |
18A
- |
14A
15A |
| -12V |
0.8A |
0.8A |
0.5A |
|
| Package
|
| Height: 120mm |
|
| Width: 500mm |
|
| Depth: 620mm |
|
| Gross weight: 12kg |
| Available Colors
|
 RAL7032 Beige
 RAL9005 Black
|
|
| Ordering Information |
Part number |
Description |
| Chassis color |
D25xxx-W
D25xxx-B |
White(Beige)
Black |
| Power Supply |
D25360
D25420
D25460 |
360W
420W
460W |
|
| Optional Parts List |
Model |
Description |
| Rail |
DR-2U-300 |
Rail kit to mount chassis to 19" wall mounted cabinet/frame more>>> |
| 5.25" blank cover |
Z5D-W
Z5D-B
Z5-W
Z5-B |
Double beige 5.25" more>>
Double black 5.25" more>>
Beige 5.25" more>
Black 5.25" more>>
|
| 3.5" blank cover |
Z3L-W
Z3L-B |
Beige 3.5" more>>
Black 3.5" more>> |
| PCI riser card |
2U2FL
|
2U riser changes the insert direction of the slot by 270 degrees. more>> |
| Low Profile PCI brackets |
- |
more>> |
|
|
PCI expansion slots.
You should cutout some metal connection straps on the back side of chassis by nipper.
You should cutout only those connection straps that would interfere with panel connectors.
To make it easier, the connector zone of chassis' back side has been made netlike.
|
Technical drawing
|
|
|
Chassis Quick Reference