DS13 19" 1U Ultra compact chassis 270mm DEEP

JANUS FAMILY® Ultra compact solution for systems based on Mini-ITX or Micro-ATX form-factor board. Bi-format capability and two-faced design with good CPU cooling, effectively doubling capacity, connection options allow to migrate from Micro-ATX to Mini-ITX and back over life time of system. Thanks to compact design chassis can be used in non-deep racks or in add-on mini-cabinets within limited spaces (bandwidth monitor, firewall, router, small server). Features: - Two-way mounting cover with possibility to place rack brackets, CDD, I/O, power supply connectors to the front or to the back (no need to remove the unit for CDD change and routine cable maintenance) - Two units fit back-to-back in the same 1U bay in standard 800mm deep rack with safe airflow spaces and good cooling

Form Factor 1U chassis support for Micro-ATX (244x244mm) and Mini-ITX motherboard Dimensions(mm) Height: 43mm Width: 483mm Depth: 270mm Net weight: 4kg Expansion slots - 1x Full-height PCI expansion slot (horizontal) - 1x place for bracket with connectors on the front panel Drive Bays - 1x HDD cage when micro-ATX motherboard used or 2x HDD cage when Mini-ITX motherboard used (look at application notes below) Front Panel LEDs: - Hard drive activity - Power - Alarm Buttons: - Reset - Power Detailed description System Cooling - 3x 40x40x25 7000RPM fans, 0.72m3 total Operating Environment (System) Operating Temperature Range: +5~45º Power Supply PSU 170W 210W Input Voltage 220VAC 220VAC +3.3V 14A 20A +5V 19A 20A +5V standby 2A 2A +12V 7A 11A -12V 0.8A 0.4A Package Height: 85mm Width: 500mm Depth: 330mm Gross weight: 4.5kg Available Colors  RAL7032 Beige     RAL9005 Black Ordering Information Part number Description Chassis color DS13xxx-W DS13xxx-B White(Beige) Black Power Supply DS13170 DS13210 170W 210W Backplate shield DS13-E5 DS13-E9 DS13-PD DS13-SP DS13-AS DS13-GB DS13-WD DS13-VS DS13 chassis with "E5" plate DS13 chassis with "E9" plate DS13 chassis with "PD" plate DS13 chassis with "SP" plate DS13 chassis with "AS" plate DS13 chassis with "GB" plate DS13 chassis with "WD" plate DS13 chassis with "VS" plate * Wide cutout on a back side for rear I/O connectors. This cutout is covered by special low profile shield/backplate. Multiple types of plates for the most popular Mini-ITX and micro-ATX motherboards are available (optional). * Detailed information and full list of available shields you can find in document     shields_en.pdf - 234kB. Motherboard EPIA PD, PE Optional Parts List Model Description 2x 2.5" HDD cage 2HD15 Cage for 2x 2,5" HDD (flanges left and right). more>> PCI riser card 1R 1U riser changes the insert direction of the slot by 90 degrees. more>> PCIe riser card 1R-e1 1U PCI Express x1 riser card changes the insert direction of the slot by 90 degrees. more>> 1R-e4 1U PCI Express x4 riser card changes the insert direction of the slot by 90 degrees. more>> FanMagic controller FanMagic, FanMagicX Internal airflow temperature monitoring and WatchDog timer. more>> Computer in chassis DS13170 with mboard Mini-ITX Technical drawing with mboard Mini-ITX Computer in chassis DS13210 with mboard micro-ATX Technical drawing with mboard micro-ATX Documentation: Chassis Quick Reference  | Safety instruction

PHOTOGALLERY
click to view large picture

You can put up to tow regular HDD in chassis when Mini-ITX motherboard is installed. If chassis is Micro-ATX, you can put only one HDD (look at the photos and drawings above).

Apply 2HD15 cage, to install 2,5" HDD in chassis DS13. The cage consists of two flanges, they are different, so pay attantion when fastening them to HDD (look at the photo).


One cage is for two 2,5" regular 9mm HDDs.


The cage you put in the regular HDD places.

You can put in chassis up to:


• 4 2.5" HDD in two cages on the regular 3.5" HDD places,
  for mini-ITX architecture;







• 2 2.5" HDD in one cage, for micro-ATX architecture.

The cage 2HD15 is supplied as option. It is advisable to order cage together with chassis.

Use only specially designed all-copper 1U CPU heatsink as a CPU cooler. Put foam bands on each side of heatsink to force the air to flow through it (look at the photo). This will provide maximum cooling efficiency and prevent CPU from overheating. Never use computer in chassis with unclosed cover.

There is a place on the front panel to fasten additional bracket (look at the photo). In standard supply the place is closed by blank bracket.