DS16 19" 1.5U Ultra compact chassis 270mm DEEP

JANUS FAMILY® Bi-format capability of Mini-ITX or Micro-ATX form-factor board allows to migrate from Micro-ATX to Mini-ITX and back over life time of system; possibility to have face on front or back side; effectively doubling capacity with good connection options. Two PCI adapters on riser card or DVD with either front or back access. Thanks to compact design chassis can be used in non-deep racks or in add-on mini-cabinets within limited spaces (bandwidth monitor, firewall, router, small server). Four chassis can be placed in the same 3U bay of standard 800mm deep rack with the help of holes in mounting brackets that allow to mount chassis with ½ U shift up or down.

Form Factor 1.5U chassis support for Micro-ATX (244x240mm) and Mini-ITX motherboard Dimensions(mm) Height: 66mm Width: 483mm Depth: 270mm Net weight: 4kg Expansion slots - 2x Full-height PCI expansion slot (horizontal) Drive Bays - 2x HDD bays (look at application notes below) - 1x CDD bay on the front or on the back. Front Panel LEDs: - Hard drive activity - Power - Alarm Buttons: - Reset - Power Detailed description System Cooling Optional! Fans 60x60mm on the front panel (up to 3) look at application notes below. Operating Environment (System) Operating Temperature Range: +5~55º Power Supply PSU 50W DP010 50W DP011 150W 250W Input Voltage Full range 100~240VAC +21~30VDC 220VAC Full range 100~240VAC +3.3V 3A 3A 10A 18A +5V 6A 6A 14A 20A +5V standby 2A 2A 2A 2A +12V 2A 2A 4.2A 16A -12V 0.1A 0.1A 0.3A 0.5A Package Height: 90mm Width: 510mm Depth: 330mm Gross weight: 4.5kg Available Colors     RAL9005 Black Ordering Information Part number Description Chassis color DS16xxx-W DS16xxx-B White(Beige) Black Power Supply DS16 DS16050 DS16050-24 DS16150 DS16250 Without PSU 50W DP010 Full range 90V~265VAC input. Fanless! 50W DP011 +21V~30VDC input. Fanless! 150W 250W Optional Parts List Model Description 2x 2.5" HDD cage 2HD15 Cage for 2x 2,5" HDD (flanges left and right) more>> 1U PCI riser 1R 1xPCI to 1xPCI 1U right angle(90 degrees) riser more>> 1.5U PCI riser 1U5R 1xPCI to 1xPCI 1.5U right angle(90 degrees) riser more>> 1U5Rx2 1xPCI to 2xPCI 1.5U right angle(90 degrees) riser more>> 1U5R2 2xPCI to 2xPCI 1.5U right angle(90 degrees) riser more>> 1U PCIe riser card 1R-e1 1U PCI Express x1 riser card changes the insert direction of the slot by 90 degrees. more>> 1R-e4 1U PCI Express x4 riser card changes the insert direction of the slot by 90 degrees. more>> 1.5U PCIe riser card 1U5R-e1 1.5U PCI Express x1 riser card changes the insert direction of the slot by 90 degrees. more>> 1U5R-e4 1.5U PCI Express x4 riser card changes the insert direction of the slot by 90 degrees. more>> FanMagic controller FanMagic, FanMagicX Internal airflow temperature monitoring and WatchDog timer more>> Cooling fan D6020V12MB 60x60x20mm cooling fan with 0.57m3/min air flow more>> Computer in chassis DS16150 with motherboard mini-ITX Technical drawing with motherboard mini-ITX Computer in chassis DS16250 with motherboard micro-ATX Technical drawing with motherboard micro-ATX Documentation: Chassis Quick Reference  | Safety instruction

PHOTOGALLERY
click to view large picture

With mini-ITX mboard installed you can put in chassis 5.25" device. 5,25" device you can put either on the front or back panel, in case of back mounting in frame.
Remark. With 5.25" device installed you can't install extension cards with riser card.

You can put up to tow regular HDD in chassis when Mini-ITX motherboard is installed. If chassis is Micro-ATX, you can put only one HDD (look at the photos and drawings above). Chassis has Z5C-B front panel cover, not Z5-B (Z5-B will not allow to install front HDD in chassis (look at photo). The Z5C cover is supplied together with chassis.

Apply 2HD15 cage, to install 2,5" HDD in chassis DS16. The cage consists of two flanges, they are different, so pay attantion when fastening them to HDD (look at the photo). One cage is for two 2,5" regular 9mm HDDs.

The cage you put in the regular HDD places.

You can put in chassis up to:


• 4 2.5" HDD in two cages on the places of two 3.5" HDD,
  for mini-ITX architecture;



• 2 2.5" HDD in one cage, for micro-ATX architecture.

The cages 2HD15 are supplied as option. It is advisable to order cages together with chassis.

Location of PCI slot on Mini-ITX motherboard is different from micro-ATX motherboard. In accordance with that there are two possibility to fasten together and install brackets on the back panel to support adapters on PCI riser card, look at the photos.

The chassis is only 66mm (1½ U) high and for CPU cooler we have only 50mm including the space for air flow. So CPU cooler with fan have to be up to 45mm to have sufficient air flow around CPU.




If you want to improve air circulation into chassis, CPU fan is not providing good cooling or there is only heat sink, put additional fans inside, on the front panel. The front panel has perforation on it to take fresh air. The perforation allows to fasten 60x60mm fans (look at the left photo). Fans are not supplied together with chassis. If you need that, order fans together with chassis.