FSP150-50PL
Overview
Dimension : 150 x 81.5 x 40.5 mm
Application : For PC
Watt : 150
Related Information :
 
Drawing
Safety
Features
 
  • High efficiency
  • Low ripple & noise
  • Output over voltage protection
  • Short circuit protection on all outputs
  • Resettable power shut down
  • Internal 4 cm fan
  • 100% burn-in under high ambient temperature (50°C)
  • Approved by UL,CSA, TUV, NEMKO, BSMI, FCC, CE, EMC, VCCI
Specifications
 

Input Specifications
• Voltage:
115/230VAC
• Frequency: 47Hz - 63Hz.
• Input current: 4.0 amps maximum / 115 Vrms;
2.0 amps maximum / 230 Vrms.
 
Output Specifications
• Over-voltage protection: +12V : 15.6V(maximum);
+5V : 6.5V (maximum);
+3.3V : 4.3V (maximum)
• Overload protection: +3.3V : 32A maximum;
+5V : 32A maximum;
+12V: 15A maximum.
• Remote ON/OFF control: The power supply shall accept a logic collector level which
will disable / enable all output voltage (excluding +5V standby).
• Power good signal: 115/230V (full load) : 100 - 500 ms
 
General Specifications
• Efficiency: 68% / 115V;
68% / 230V.
• Hold-up time: 17.0 ms minimum: at  115V / 60 Hz;
17.0 ms minimum: at  230V / 50 Hz.
 
Environmental Specifications
• Operating conditions:
ambient temperature 0°C~+35°C
• Storage and
  shipping conditions: 		ambient temperature -20°C~+80°C
• Dielectric withstand: input / output 1800 VAC for 1 second,
input to frame ground 1800VAC for 1 second
Output
 
Output Voltage Min. load Max. load Load Reg. Ripple & Noise
+5Vsb0.0A2.0A±5%50mV P-P
-12V0.0A0.3A±10%120mV P-P
+12V0.3A4.2A±5%120mV P-P
+5V1.0A14.0A±5%50mV P-P
+3.3V0.3A10.0A±5%50mV P-P
+3.3V & +5V total output not exeed 85W / *-5V optional (0.1A Max.)
 
* Detailed specifications and drawings provided upon request.